PunBB / FluxBB Discussion Forum
您尚未登入。
消息公佈統一於PunBB最新中文化語系
本文於官方論壇的連結
##
## Mod title: Admin Control Panel Multilanguage
##
## Mod version: 1.0.2
## Works with PunBB: 1.2.X
## Based on latest 1.2.7
## Release date: 2006-09-28
## Author: CoolHD (coolhd.tw@yahoo.com.tw)
##
## Description: Multilanguage support for PunBB Admin Control Panel.
## This modification was base on Sakis' (aka SSB) "Admin Control Panel Localization".
##
## Affected files: \admin_bans.php
## \admin_categories.php
## \admin_censoring.php
## \admin_forums.php
## \admin_groups.php
## \admin_index.php
## \admin_loader.php
## \admin_maintenance.php
## \admin_options.php
## \admin_permissions.php
## \admin_prune.php
## \admin_ranks.php
## \admin_reports.php
## \admin_users.php
## \moderate.php
## \include\common_admin.php
##
## New files: \lang\English\admin_bans.php
## \lang\English\admin_categories.php
## \lang\English\admin_censoring.php
## \lang\English\admin_forums.php
## \lang\English\admin_groups.php
## \lang\English\admin_index.php
## \lang\English\admin_loader.php
## \lang\English\admin_maintenance.php
## \lang\English\admin_options.php
## \lang\English\admin_permissions.php
## \lang\English\admin_prune.php
## \lang\English\admin_ranks.php
## \lang\English\admin_reports.php
## \lang\English\admin_users.php
## \lang\English\moderate.php
## \lang\English\common_admin.php
##
## Affects DB: No
##
## DISCLAIMER: Please note that "mods" are not officially supported by
## PunBB. Installation of this modification is done at your
## own risk. Backup your forum database and any and all
## applicable files before proceeding.
##安裝方法:
1. 備份原來的檔案.
2. 解開壓縮檔,並將裡頭的檔上傳到您安裝PunBB的位置,取代舊檔案.
3. 複製新的語系檔到語系目錄(lang/Traditional_Chinese 或 lang/Simplified_Chinese).
4. 完成.
由於管理介面的文字敘述多而複雜,有些語意翻譯跟程式調整多花了很多時間,但仍不能保證百分之百符合大家的口味.如果您在使用上有發現語意不清或者不自然的地方,歡迎您來信建議或於本論壇發文指教. ![]()
本站點擊下載
最後修改: coolhd (2006-09-28 01:48:35)
離線
照您的方法把檔案蓋掉,再安裝中文語系
安裝後,出現這行
There is no valid language pack 'Chinese' installed. Please reinstall a language of that name.
請問是哪裡出問題??
離線
bruce 引用:
照您的方法把檔案蓋掉,再安裝中文語系
安裝後,出現這行
There is no valid language pack 'Chinese' installed. Please reinstall a language of that name.
請問是哪裡出問題??
如果說程式在執行時找不到語系檔,應該是不會出現'Chinese'這樣的字眼才對,有錯誤應該是出現'Traditional_Chinese'或者'Simplified_Chinese'字眼才對,因為它是比對語系的目錄名稱.
請問您是否有改過原先的語系目錄名稱呢?中文語系檔壓縮包裡的預設語系目錄不能改喔.改了程式就找不到語系了.
離線
coolhd 引用:
bruce 引用:
照您的方法把檔案蓋掉,再安裝中文語系
安裝後,出現這行
There is no valid language pack 'Chinese' installed. Please reinstall a language of that name.
請問是哪裡出問題??如果說程式在執行時找不到語系檔,應該是不會出現'Chinese'這樣的字眼才對,有錯誤應該是出現'Traditional_Chinese'或者'Simplified_Chinese'字眼才對,因為它是比對語系的目錄名稱.
請問您是否有改過原先的語系目錄名稱呢?中文語系檔壓縮包裡的預設語系目錄不能改喔.改了程式就找不到語系了.
您好
我已搞定後台中文問題了~~
謝謝
不過卻另外出現一個問題
在首頁最上面的導覽列
首頁 會員列表 搜尋 個人資料 登出
後台要新增自己的連結時,填入後,按送出,導覽列沒有出現
正常來說,連結的設定應該也還要在,但卻是空白,剛才輸入的都不見
請教是哪裡有問題??
謝謝您~~
離線
coolhd 引用:
要在頁首導覽列新增連結結選項的語法如下:
管理-->基本設定-->額外的選單項目:0=<a href="http://www.ezcart.net">卓越ezCart</a>數字0是排列順序,可自己調.連結的部分改成自己要的連結
語法寫對了,就會像本站頁首一樣,出現"卓越ezCart"的連結在導覽列上.
您好
語法我知道
現在出現的問題是
加入後,送出,導覽列上不會有
再返回 管理-->基本設定-->額外的選單項目:
剛才輸入的資料會不見,正常應該都要存在的
還有剛才試了,網站描述也沒反應
補充一下
那兩個欄位的值並沒有寫入資料庫(資料庫權限已全開!!)
剛才直接 去資料庫新增欄位值,是可以顯示出來的
最後修改: bruce (2005-08-22 04:27:06)
離線
keroro 引用:
新版的可以裝嗎...
基本上 1.2.12 版與 1.2.11 版差異不大,
因為只是三個安全性方面的修正。
所以這個中文語系還是可以用的。![]()
離線